1000W Pond De (1000Watts)

⭐ Key Features

•【Power Choice】3 different wattage pond deicer for almost any size outdoor pond, see our area chart to choose the right wattage deicer for your area pond.

•【Thermostatic control】Deicer is thermostatically controlled to turn on and off as needed to keep your pond from freezing over, The deicer will only work when the temperature drops below 48.04°F. Temperature control for each unit, starting temperature is 48.04°F, when the water temperature rises to 95°F,automatically turn off the internal thermostat and turn on the protection state.

•【Floating and diving modes】Can be used as a floating pond deicer, or can be converted into a diving pond deicer in a few seconds, simply unscrew the floating ring at the top to convert to a diving deicer. Size: This model uses 1500 watts of power, please refer to our area chart to see if this is the right choice for your area pond.

•【Important】In order to provide continuous shock protection, have a qualified electrician properly install the ground fault circuit breaker (GFC/) receptacle. Keep the heating element away from mineral buildup, allowing mineral buildup can cause the heater to stop working or trip. Suitable for 120 volts only!

•【Foam】Due to changes in temperature, the natural dissolved gases in the water will create foam in or around the deicer, which is normal, non-toxic, and natural.

🛠️ Specifications

• Brand : MAPOTAD
• Size : 1000Watts
• Color : Black
• Item highlights : Controlled Pond Hermostatical Heater,Keep Pond from Freezing Over with Indicated light
• Type : OUTDOOR_LIVING
• Item dimensions : H: 5.0 / L: 10.6 / W: 10.6
• Package dimensions : H: 5.1 / L: 11.5 / W: 11.1 (Weight: 2.78)

📋 Product Description

Warning: This is an electrical product. Read all instructions and precautions carefully before operation, following all instructions and instructions incorrectly may result in electric shock or fire. Correct installation method 1. Warning: In order to provide continuous shock protection, have a qualified electrician properly install the ground fault circuit breaker (GFC/) receptacle 2. Suitable for outdoor use, and immediately install rain and snow protection near the location where the equipment is used. 3. When using the deicer, the heating element must always be submerged in water. When used as a floating deicer, ensure that the rope is placed correctly to ensure that the deicer floats on a level surface 4. Never let the pond run dry. 5. Don't use extension cords! Check the wires for damage before use 6. When inserting the heating element, do not expose it to air. The heating element must be underwater at all times. Maintenance You can thread the power cord through the top of the housing so that you can unscrew the heater from the bottom of the housing. Once the heater is removed from the housing, run the heater under warm water and clean it with cloth and soapy water, if this method is difficult to remove the scale, use lime removal! Simply soak the steel heating element in a shallow dish filled with a half-inch deep lime removal solution. After soaking and cleaning, rinse and reassemble the deicer into the housing。 Floating mode Place the heater in the desired location of the pond and plug it into an outlet. It is important to ensure that the outlet is usable outdoors, protected from rain and snow, the pond deicer automatically turns on and off once the surrounding water temperature drops, is thermostically controlled, and maintains an ice-free area. Diving mode Simply unscrew the floating ring from the top of the deicer to convert to a submersible deicer. If the surface of the pond is frozen 1. Drill a hole in the ice with an ice drill. (Be careful not to cut the ice, as the shock wave can injure or kill your fish.) 2. Then put your heater through this hole and run your wire to a properly grounded outlet, protecting the wire from damage. If you don't have an ice drill 1. Place a large saucepan or bucket filled with water on the ice. 2. Place the heater in a container of water and plug the heater into a properly grounded outlet. 3. The heater will heat the water and container, melting a hole in the pond ice. When a hole is melted unplug the heater and remove the container. 4. Thread the heater through the hole and connect the power cable to the grounded socket to avoid damage to the power cable Vital safeguard Important safety measures: Have a qualified electrician install a properly grounded outlet that can be used outdoors and is protected from rain and snow near where the heater is used. Install electrical wiring and heaters to prevent livestock injury. Don't walk on thin ice. Read all instructions. · Check the wires for damage before use. · Store indoors after winter · Never let the pond run dry. · Do not expose the heating element to air when inserting it. Self-regulating pond deicer 120V:500W1000W1500W The deicer will only work when the temperature drops below 48.04°F. Temperature control for each unit, starting temperature is 48.04°F, when the water temperature rises to 95°F, turn off the internal thermostat and turn on the protection state. The heating element must be underwater at all times. · Do not use extension cords! Maintain a consistent temperature for each device.